Tips on Maintaining Garage Door Springs and Cables, Garage Door Spring Replacement Tips and Advice
Garage doors are susceptible to
damage and disintegration over time which calls for the door and its parts to
be frequently checked for problems to prevent breakdowns and malfunctions. Thus,
most intelligent homeowners will either have a scheduled time for maintenance
checks by a garage repair company or learn to do it themselves.
Maintenance tips
To maintain garage door tension
springs, here are some essential tips to keep in mind:
§ Make sure you have the
necessary tools and a ladder on hand to complete the maintenance checks.
§ Disconnect the garage door
opener's power to ensure that the garage door doesn't turn on or off during
your maintenance check and end up injuring you
§ Make sure that your garage
door’s torsion shafts operate smoothly by lifting the door a few inches and
inspecting the bar; else, oil the torsion springs.
§ File out any buildup that
has formed around the center mounting bracket that holds the torsion springs in
place
§ Tighten any bolts around
the brackets to make sure that nothing comes undone at an unexpected time
§ Adequately lubricate all
moving parts of the garage door, such as the tracks and the hardware that
supports the torsion spring.
§ Ensure the winding bracket
is protected while lubricating the torsion spring to not allow the spring to unwind
Here are some tips on maintaining
your garage door cables:
§ Simple straight cables
don’t require much maintenance
§ Keep an eye out for kinks
or frayed segments of the cable that needs repairing
§ Get rid of any protrusions
in the cable path to prevent future damage
§ Make sure to not
over-lubricate the cable to not attract dirt
§ Scrape off any debris or
dirt found along the length of the cable
Replacing garage door cables
Repairing and maintaining your
existing garage door hardware is doable, whereas there are several things to
consider while entirely replacing the garage door cable and springs.
Here are some of the essential tips to remember:
§ Replacing the garage door cable is something that
experienced specialists should perform to prevent anyone from getting injured.
§ Ensure you have all the
right tools needed for replacing garage door cable and springs
§ Disengage the garage door
opener before replacing the garage door cable
§ Unwind the garage door
spring to release all the tension and loosen the screws on the cable drum
§ Remove the bottom bracket
and then the existing cable, insert the new cable into the slot, and wind it
onto the cable drum.
§ Tighten the set screws (do
not over-tighten)
§ Use winding bars to
increase the tension in the springs after replacing the bottom bracket.
§ After replacing the
garage door cable, you can re-engage the door and plug the garage door
opener back in.
For More Details, Visit Us:
Comments
Post a Comment